Skip to main content

Automate Your Warehouse with these Best Practices | LoadProof

 


If you are looking at little automation in your warehouse this is the best practice to lookout. If you are automating your warehouse in terms of conveyors or sorters or even robots it would make a lot of sense to mark your SKUs as conveyable or not conveyable, sortable or non-sortable and as the robots coming everywhere robotable or non-robotable. The last thing you want to do is make a small product or a big product ride the conveyor. Technically all conveyors have certain requirements mentioned, such as the box size of certain length, width, and height.  The carton’s matching these requirements can only convey through the conveyor. The same requirements for sorting the products using sorter. It could be whatever type of sorter that you might have big sorter or small sorter and even robots. The only difference between robots and conveyors is the businesses. Before it used to change every five to seven years and now the changes happening even faster. Imagine either your volume picked up or you’re handling much bigger volume because your business has picked up or your business is changing. Before it used to be all retail now it’s all ecomm, before you used to handle all cases, but now you are handling units, which means your business have changed. That means you have to change your process and your layout has to change. 

If you had these roller conveyors, imagine ripping that off and then redoing the layout completely. That’s a lot of work and it’s very expensive to take it off and then put it to construct in a new manner. You may not be able to reuse the same thing, you may have to buy brand new conveyor equipment. So all those things are the drawbacks with the old-school mounts fixed on the floor mounted, on the wall mounted, on the roof. Things have changed now and the robots are configurable, which means you can quickly configure, program, and change the way the robot works. I mean before it was going to let’s say from here to here and now when we need to change it, you can easily change it anyway. It could be a guided vehicle which goes around by scanning the barcodes on the floor or it’s doing something else completely automated like an automatic car or something like. A lidar based sensor reads the data and then it detects on obstacles and then finds the way and then keeps going. Robots are very easy to reconfigure and reprogram. They can be made to go in a completely different direction or to make it do something else. That’s the appeal of robots and also the cost of all these sensors and the electronics have come down significantly which makes the robots and affordable option in a DC environment. 

Click here to continue reading this article.


Comments

Popular posts from this blog

Optimize Your Warehouse Replenishments with these Best Practices | LoadProof

  This best practice is about making  replenishments  inside the warehouse. It is important to stay on the top off replenishments always in your warehouse. If you have just one shift that you are running it would help a lot. If you spend extra hours in the evening and then do the topping off all your active locations it will be helpful for the pickers in the next shift. In the next morning when the pickers come after all the locations will be full and they can start picking right away without wasting time in replenishments. If you have two shifts running either choose the second shift or have a third shift if possible and keep doing the top off replenishments. There are active replenishment locations and these active locations have Min and Max. Whenever your inventory falls below min, replenishments are going to get triggered or it will get triggered if there is an order that needs a lot of picks from a particular location. This will drive the location down which will tri...

Picture Documentation for Freight Claims White Paper – Part I | LoadProof

  INTRODUCTION This document describes the benefits of an effective Picture Documentation System(PDS) that helps with getting Freight Claims Paid faster. An effective pictures documentation system helps with 1 – Get Freight Claims paid much faster by making pictures available quickly and easily, 2 – Provides visibility to the damages through pictures. The visibility gained provides insight into the handling mistakes made while the orders are fulfilled, so that the parties can determine and establish accountability boundaries and get the shipper paid. BACKGROUND What are Freight Claims? A freight claim is a legal demand by a shipper or a consignee to a carrier for financial reimbursement for a loss or a damage of a shipment. Freight Claims are claims submitted by manufacturers/suppliers/shippers to transportation vendors and or carriers, when the goods the Supplier shipped did not arrive at the destination in a pristine state. Instead it arrived as damaged, the packaging was damaged...

3PL Panacea: The Flexible Mobile Supply Chain Platform | LoadProof

  The third-party logistics (3PL) business is tough, because it covers a wide gamut of service offerings, that include some combination of: Just move my boxes and/or pallets. Move my boxes and/or pallets and store them in your warehouse. Move my boxes and/or pallets and operate my facility. Own all the labor and activities in my facility. Offer all distribution services for my product (All I will do is download my orders into your system/supply chain). I’ve even run into more complicated models of operation, including both tightly and loosely coupled models.  In a tightly-coupled model, the supply chain systems of the 3PL, including orders, inventory, transportation, advanced shipment notices, purchase orders, and more, are tightly integrated into the shipper’s supply chain systems. All this information seamlessly flows between both supply chain systems of the 3PL and the shipper. They stay in synch with each other and the parties perform the functions in their respective syst...